Server hardware stuff

[Rainnmannx]

Would this lower tps on the freebietfc server? It was around 18 this morning with 2 on, and around 14 now with 4 on.
If it is I will let people know if they ask about it. And this in no way a push to get it fixed, family is first .

[InsaneJ]

I'm not sure if TPS will drop when loading chunks takes a bit longer. It might.

As for fixing the issue, that won't take much time. If/when I have the funds it's just a matter of ordering a drive. Then pull the defective drive from the server and replace it with the new one. The raid controller will then start rebuilding the array automatically. After that is done I'll move the virtual machines back to the sas drives. All in all it won't take more than half an hour of button pushing. The rebuilding and virtual machine moving will take longer but that's just a progress bar filling up

[Rainnmannx]

Is there anything I can do to check what may be causing the tps drop?
I used /lag and the entities where around 4000, below the 10k number I have seen on the message.
Also at one point mem had 646 or so remaining.

/lag
now shows
2065 chunks, 990 entities, 126,537 tiles, looks like it reset about 3 hours ago. and is back to 19.87 tps
though the one on the tab screen show a different number of about 4, bukkit tps?

[InsaneJ]

/lag shows TPS from the Bukkit side of the server, same as the value shown when pressing TAB. Use /forge tps instead to get a more accurate reading on how the server is doing. Bukkit TPS tends to always be slightly lower than the Forge TPS and less than 20 (19,xx). To me it looks like one sits on top of the other since Forge and Forge mods seem to take precedence to Bukkit and Bukkit plugins.

The TAB TPS being low was due to a glitch in BungeeCord and the plugin that takes care of that information. I've restarted BungeeCord and now the 'Bukkit TPS' in the TAB screen is similar to that when you type /lag or /tps





Bottom pic shows output of:
/lag
/tps
/forge tps

[InsaneJ]

I've received three donations last night. Thanks guys!
With this I'm going to purchase two new drives. Unfortunately the drives I linked above won't ship to The Netherlands. Buying them here (European Amazon) they are 89.98 euro. Which means to avoid an angry wife we could really use another donation or two

The two drives will replace the faulty one and expand the array to give us a net storage of 900GB with more I/O. (Raid-5 capacity = n-1, meaning: 4x300 - 300) The drives should arrive in a few days.

[InsaneJ]

The new hard drives were delivered today. I put them in the server and, although this is something for which the server can remain on, it went down anyway. Reason being my 2 year old who saw a shiny power button and just had to push it. I still haven't figured out how I can configure ESXi to ignore the power button. So... apologies for the unscheduled down time

The new drives have been put in a raid-5 array and it's currently initializing. We're growing from 600 to 900GB (4x300 - 300) and when that's done I'll start moving virtual machines back to this array. After that server performance should be back to normal.

[Sverf]

Maybe you can borrow the dance dance authentication from stackoverflow